Articles tagged with: GYU-IN JEE

coordinates

Dec 2010 | No Comment

,
This paper describes the performance improvement of GPS/DR (Global Positioning System/Dead Reckoning) Integration system utilizing the area decision algorithm and vehicle movement information. In GPS/DR Integration system, generally DR sensor errors are estimated and corrected using GPS information when GPS is available. In GPS signal blockage area, i.e., tunnel and underground parking area, DR sensor errors are accumulated and navigation solution is diverged eventually. We utilize the car movement…

Nov 2005 | Comments Off on Indoor positioning in wireless
pic21

Recently mobile location based services (LBS) are provided via a mobile terminal such as a personal digital assistant (PDA), a cellular phone and so on. The location method that searches where the mobile terminal of a user is accurately is a key factor for providing convenient and useful LBS. The most well known method associated with positioning system is GPS. The signal of GPS satellites can be always acquired outdoors and this system provides comparatively accurate location information. However, there are difficulties in applying GPS directly to indoor positioning because of the weakness of signal. And the positioning using the mobile communication signal between a base station and a cellular phone does not provide adequate accuracy due to some technical limitations of communication systems when applied to navigation. In addition, severe multipaths are present in an indoor environment. So a new wireless communication technology is required for indoor positioning to achieve a better and appropriate accuracy. Wireless local area network (LAN) has been installed in a number of indoor areas such as office, terminal, campus, and park with interests in mobile Internet. Therefore, it is expected that a wireless LAN signal would be easily acquired for indoor positioning. Various positioning measurements like time of arrival (TOA), time difference of arrival (TDOA), and received signal strength may be employed for indoor positioning. Employing TOA or TDOA measurements requires a time synchronization between a transmitter and a receiver. But, a time synchronization between a transmitter and a receiver is very difficult if not impossible in a wireless LAN. Therefore, it is more appropriate to use signal strength for indoor positioning with a wireless LAN.